Adjustable And Reversible Kids Face Mask.
Made with 
50cm of each
2 X Cotton fabrics
Scissors
Pins
Iron And Ironing Board
50cm of each
2 X Cotton fabrics
Scissors
Pins
Iron And Ironing Board
Cord Puller
Safety Pin
Download template and cut out 2 pieces of fabric for each layer.
1
Made with 
Match right sides of each piece together and sew along curved edge with a 1cm seam allowance.
2
Made with 
Snip into seam allowance of the curved seams and press to one side.
3
Made with 
Top stitch the seam allowance down along the centre seam of each layer.
4
Made with 
On the inner piece, press the straight edges down 6mm. Stitch down close to the edge roughly 3mm.
5
Made with 
Pin pieces with right sides facing in and sew along the top and bottom edges with a 6mm seam.
6
Made with 
Turn mask right side out and press. Top stitch along the top and bottom edges roughly 3mm.
7
Made with 
Press the outer layer straight edges back 1cm. Pin and stitch in place to create drawstring casing.
8
Made with 
To make cord, cut a piece 4cm x 50cm. Press edges in 5mm and top stitch to secure in place.
9
Made with 
Use a safety pin to thread the cord through the top ends of the casing on each side of the mask.
10
Made with 
Thread the ends through the clasp and tie each end of the cord in a knot.
11
Made with 
Place a filter or tissue in between the layers of your mask
12
Made with 
To wear, adjust the length of your mask using the cord toggle!
13
Made with