How To Drive A Hinkley
Open the seat in the back to accesss the batteries.
Turn on the two batteries, start and house.
Bring bright boat down with boat tied up.
Turn on the boat when you are floating inside the bunks.
Engage the engine. It only goes forward.
Make sure the auto/manual control is in auto. Down is auto.
Put the joystick in reverse and hold it. (You need to hold it for it to work.)
Flip boat to manual and make sure grey toggle is up.
Hold the grey switch up for 10 seconds to bring the bucket into forward position.
Tap green to engage the steering wheel.
Push forward and back to control the speed.
When you’re ready to doc, put the boat back into auto.
Control the boat with the joystick. Reminder, to go forward or back. Keep throttle engaged.
Raise up the boat and remember to turn off the engine before the boat gets out of the water.
With the key still in, press and hold the black button to shut off the motor.
Turn off both batteries.
Change Your Oil
Jumpstart a Motorcycle
How To Create Your First Jumprope
Made with Jumprope