Basic Glitter Tumbler Part 2
Made with 
In part 2 of this tutorial we will dive into sanding, rim clean up, and adding vinyl decals.
Made with 
Sand
1
Made with 
Clean up the rim
2
Made with 
Scuff up the bottom.
3
Made with 
Feel for any areas that still need sanding
4
Made with 
Use a true control knife to remove any drips from the inside of the cup.
5
Made with 
Wipe with alcohol
6
Made with 
Weed and transfer decal to transfer tape
7
Made with 
Apply decal to tumbler
8
Made with 
Add a thin top coat over decals. Without decals this could have been a final coat.
9
Made with 
Sand smooth being cautious of any vinyl that hasn’t gotten fully covered.
10
Made with 
Wipe with alcohol and allow to dry.
11
Made with 
Mix and pour a final layer (fingers crossed! 🤞🏼)
12
Made with 
There are so many ways you could do any 1 step so feel free to be creative & go with your own flow.
Made with