Beginner’s Guide To Glitter Tumbler Part 1
Made with 
In this tutorial I will show you how I make a basic single color epoxy glitter tumbler.
Made with 
Prep cup with a light Sand.
1
Made with 
Wash and dry
2
Made with 
Put onto handle and wipe with alcohol. Allow to DRY completely.
3
Made with 
Spray paint your tumbler in a well ventilated area. Allow to dry. Repeat if necessary.
4
Made with 
I measure epoxy with the water method. Part A line.
5
Made with 
Part B line. Total 20 mls epoxy. Dump the water.
6
Made with 
DUMP WATER FIRST! Fill part A to first line and part B to second line.
7
Made with 
Mix until clear.
8
Made with 
Apply thin coat, under 1-5 ml depending on size. Spread evenly.
9
Made with 
Glitter
10
Made with 
Don’t forget the bottom!
11
Made with 
Spin 2-4 hours.
12
Made with 
Mix and apply epoxy. 10-20 mls based on cup size.
13
Made with 
No sanding unless you cannot feel roughness from your glitter. Add a top coat.
Made with 
Sanding, rim clean up, and vinyl decals coming in part 2!
Made with