Distressed Constitution Tumbler
Made with 
I may earn commissions for purchases made through links in this video.
Cricut Vinyl
Buy
8 1/2 X 11 Printer Paper
Buy
Torch
Buy
Propane Gas
Buy
Cricut Vinyl
Buy
8 1/2 X 11 Printer Paper
Buy
Torch
Buy
Propane Gas
Buy
Rustoleum Spray Paint
Buy
Rustoleum Spray Paint
Buy
Transfer Tape
Buy
Nitrile Gloves
Buy
Black Acrylic Paint
Buy
Artist Resin
Buy
Fast Set Epoxy
Buy
Quick Coat
Buy
Base paint your tumbler red w/one blue square for the stars, then add one layer of resin.
1
Made with 
Print your image on plain white printer paper. Trim the paper and tear into thin strips to burn.
2
Made with 
Burn the edges of your paper. Best to do this outdoors with some water handy just in case.
3
Made with 
Cut your stars out on vinyl. I’m using cream Cricut brand.
4
Made with 
Trim your vinyl right along the edges of the cuts.
5
Made with 
Add transfer tape.
6
Made with 
Burnish your tape and remove the paper backing then apply to tumbler.
7
Made with 
Weed the extra vinyl leaving only the stars.
8
Made with 
You don’t have to weed this way, it’s just easier when you have small cuts.
9
Made with 
Paint black acrylic paint around the tumbler and smear it to create a distressed look. Let dry.
10
Made with 
Next coat your tumbler with a thin layer of QC. This will help smudge the paint areas.
11
Made with 
Now to add your paper. Apply QC to your tumbler then press the paper down.
12
Made with 
Once adhered go over the entire piece with a thin coat of QC.
13
Made with 
Repeat step 12 and 13 adding any additional pieces.
14
Made with 
Go over the entire tumbler with a thin layer, making sure all the edges are pressed down and covered
15
Made with 
After your QC is dry add a layer of Artist Resin.
16
Made with 
If any areas aren’t covered with the last layer, lightly sand then add a final coat and enjoy!
17
Made with