Use 12 x 6 inches marble pieces. Sketch out a design where excess water can drain into the sink.
1
Made with 
Use a tile saw to cut marble tiles in half.
2
Made with 
Move the fence 3/4” of an inch to make the second cut on the other marble piece.
3
Made with 
Make a series of 1/2” inch partial cuts into the marble tile to make drainage hole .
4
Made with 
Use aluminum angle sections to reinforce the connections. Cut slowly with a compound miter saw.
5
Made with 
Glue the aluminum angle sections to the marble tiles with Gorilla Clear Construction Adhesive.
6
Made with 
Let the glue cure for 24hrs & scrape away the excess glue.
7
Made with 
Glue in the other marble pieces. Use clamps to hold tiles together.
8
Made with 
Remove clamps & place scrap marble piece to fill the gap in the bottom. Use chopstick to seal inside
9
Made with 
Cut metal screen and place it where the drainage hole is to prevent gravel to go out.
10
Made with 
Use silicone to seal the inside of the planter & carve grooves where drainage hole is.
11
Made with 
Sand the planter for a soft matte finish.
12
Made with 
Add in soil and gravel to planter.
13
Made with 
Add herbs to planter & make grooves deeper where drainage hole is so that water can flow easily.
14
Made with 
Thanks for watching!
Made with 
Gorilla Max Strength Construction Adhesive Clear
Tabletop Tile Saw
Basil Planter
Miracle Grow Natures Care
Gorilla Max Strength Construction Adhesive Clear
Tabletop Tile Saw
Basil Planter
Miracle Grow Natures Care
Marble Tiles