DIY Laundry Folding Table With Drying Drawers
Cut your plywood to size
1
Glue two pieces together for your middle leg.
2
Measure and cut your 1x3s.
4
Glue your 1x3s to the outer legs.
5
Drill pocket holes in the 3 legs to attach to the countertop.
6
Make your countertop by gluing and nailing 1x2s to plywood.
7
Cut 1x2s for the drawers.
9
Drill pocket holes to attach the front and backs of the drawers to the sides.
10
Grab a spare 1x2 and mark the center and where each dowel should go.
11
Make that spare 1x2 a guide so your dowels will be consistently spaced.
12
Drill holes in the 1x2s you'll use as drawer sides.
13
Assemble the drying drawers.
14
Add netting to lay-flat drying racks.
15
Sand, prime, and paint.
16
Use a guide to drill holes for your hardware in the drawer fronts.
17
Attach the drawer fronts and handles to the drawers.
18
Measure and mark where your drawer slides will go
19
Attach hardware to drawers.
20
Install your drawer glides.
21
Attach the legs to the top using glue and pocket holes. Add the drawers.
22
Explore more Jumprope
Want to create? It’s fast, easy, free & open to anyone.
Learn more.
More than 50,000 step-by-step guides to learn how to do anything.