DIY Log Stool
Founder of HomeMade Modern
See more from benuyeda
Use an electric chainsaw to cut one end of the log into 6 pieces.
1
Use lighter fluid to the inside part of log. Use machete to scrape away the chunks of charred wood.
2
Start shaping the log with a 40 grit flat disk on angle grinder.
3
Switch to Turbo Plain attachment. With this attachment carve along the burned out cut lines.
4
Use orbital sander to sand the log. Seal the log with 2 coats of Minwax Wipe-On Poly.
5
Here is the end result!
Log
Minwax Wipe on Poly
Orbital Sander
Chainsaw