Fifo Bottle Resin Storing Hack Tutorial
Grab some Fifo bottles and let’s get started.
1
Biggest complaint is leaking. To prevent that mix up 2 ml Part A and B of Fast Set.
2
Using your finger smooth some resin around the rim of your bottles, then screw the lid on tightly.
3
Set the bottles aside spout up while curing. Once cured you can fill the bottles.
4
Unscrew the spout end of your bottle. Before you fill double check to make sure you have both B’s.
5
Fill your bottle then screw the lid back on tight.
6
Do the same with your Part A.
7
Now your bottles are ready for use.
8
Grab a 60 ml syringe.
9
Insert your syringe and draw back the amount you need for your mix.
10
If you get bubbles, hold the syringe upright and the bubbles will rise then you can push them out.
11
Add to your mixing cup.
12
Now draw back your Part A. I always add Part A second so none of it sticks to the side of my cup.
13
Now you can mix and apply to your project. No extra cups to clean up or keep track of!
14
When not using store with the spout facing up. This will prevent leaking.
15
I may earn commissions for purchases made through links in this video.
Fifo Bottles
Buy
Fast Set Epoxy
Buy
Artist Resin
Buy
EcoArt Solutions Stirring Sticks
Buy
Nitrile Gloves
Buy
EcoArt Solutions Mixing Cup
Buy
60 ml Syringe
Buy
See All