Hang Method: Glitter Tumbler With NMO Glitter
What you'll need
Affiliate Disclosure: As an Amazon Affiliate, I may earn commissions from qualifying purchases.
1
NMO Glitter - Wine Snob
Buy
1
Rose Gold Spray Paint
Buy
1
True 32 Tumbler
Buy
CCDIY Ultra Clear Fast Set
Buy
1
Exacto Knife
Buy
1
Acetone
Buy
1
Magic Eraser
Buy
1
Heat gun
Buy
1
Torch
Buy
1
Camping Gas
Buy
1
Counter Culture DIY Quick Coat
Buy
After prepping and spray painting your tumbler, mix epoxy. Start on the bottom and with pressure, slide the epoxy down the entire tumbler.
1
Lay down parchment paper to catch your glitter. Start at the bottom or top and cover the entire tumbler with glitter. Let cure on drying rack
2
Spread quick coat over entire cup, let dry 15-30 minutes. If you don’t have quick coat, spray sealer works too!
3
Slowly mix your epoxy until combined.
4
Use heat gun to pop bubbles after epoxy is mixed and sets for 5 minutes. Only heat for a couple seconds. Epoxy tumbler
5
Using your torch, quickly run it over the cup to pop bubbles (about 6 in away from tumbler)
6
After at least two coats of epoxy, sand the tumbler smooth. I prefer wet sanding blocks but you can use any type you like.
7
Using a sharp exacto knife cut out any excess epoxy. Using a cloth or magic eraser, wet with acetone and wipe out the tumbler.
9
My shop
Affiliate Disclosure: As an Amazon Affiliate, I may earn commissions from qualifying purchases.
Clear Spray
In 1 guides
Gloves
In 1 guides
Vinyl
In 1 guides
Sponge Applicator
In 1 guides
Alcohol ink
In 1 guides
View full shop
Explore more Jumprope
Want to create? It’s fast, easy, free & open to anyone.
Learn more.
More than 50,000 step-by-step guides to learn how to do anything.