Make A Face Mask Holder For The Car
Gather materials: 100% cotton fabric, fusible fleece, heat transfer vinyl, 1” webbing, & hook & loop tape.
Import the free “Wash Me” SVG into tour machine’s design studio. Prepare the graphic for cutting. Remember: HTV cuts must be mirrored.
Use your machine to cut out the design. Remember that the shiny plastic (aka transfer sheet) is face down on the mat.
Weed your design & set aside for later.
Cut your fabric to size. You need four pieces of fabric sized 11” x 8”.
Cut your fusible fleece to size. You need two pieces at 8” x 11”.
Fuse each piece of fusible fleece to a piece of fabric.
Layer your fabrics for sewing & clip the top edges. The piece with fusible fleece should face out.
Sew the two ends of the fabric pieces together using a 1/4” seam allowance. Press open the seams then turn fabrics right sides out & press again.
Apply your HTV design to one of the bag panels.
Place panels right sides together, clip, & sew the two side edges & bottom edges together using 1/4” seam allowance.
Shape the bottom of the bag by cutting a 2” x 2” square from each bottom corner. Match the raw edges, clip, & sew together using a zigzag stitch.
Turn bag right sides out. Cut an 18” piece of webbing. Singe the ends to keep them from unraveling. Place webbing 2” away from one side & clip.
Top stitch around the top to secure the strap then sew around the square to strengthen. Cut a 2” strip of hook & loop tape, clip, & sew.
It’s finished and ready to use!
What you'll need
Affiliate Disclosure: I may earn commissions for purchases made through links in this Jumprope.
1 piece
Heat Transfer Vinyl 7”X 7”
100% Cotton Fabric (solid)
Fusible Fleece
1” Webbing
Hook and Loop Tape
Sewing Clips
Sewing Machine
Teflon Sheet For Heat Press Or Parchment Paper
Free SVG (Wash me)
Stop by for even more DIY projects you’re sure to love!
Explore more Jumprope
Want to create? It’s fast, easy, free & open to anyone.
Learn more.
More than 50,000 step-by-step guides to learn how to do anything.