Make A Roller Stamp Handle & Block (K-8)
12” per student
1/2” PVC
4” per roller block / student
1” PVC
PVC Cutter or Hacksaw
1 per maker
6” X 9” Adhesive Craft Foam Sheet
12” per student
1/2” PVC
4” per roller block / student
1” PVC
PVC Cutter or Hacksaw
1 per maker
6” X 9” Adhesive Craft Foam Sheet
Scissors
Markers
Ruler
Cut 4” long piece of 1” PVC for your roller stamp block. Use a PVC cutter or hacksaw.Cut 4” long piece of 1” PVC for your roller stamp block. Use a PVC cutter or hacksaw.
1
Cut a 12” piece of 1/2” PVC for the roller handle.Cut a 12” piece of 1/2” PVC for the roller handle.
2
Cut a 1.5” strip of craft foam from a 6”x9” adhesive craft foam sheet. Save all pieces.Cut a 1.5” strip of craft foam from a 6”x9” adhesive craft foam sheet. Save all pieces.
3
Wrap the center of the 1/2” PVC handle. This will grip your roller stamp block from the inside.Wrap the center of the 1/2” PVC handle. This will grip your roller stamp block from the inside.
4
The narrow PVC fits into the larger piece!The narrow PVC fits into the larger piece!
5
Thanks!!