Draw a design using a thick crayon/marker. Interconnected +overlapping designs work best.
To cut this out you should have a cutting mat, and a SHARP/new xacto blade.
Use the tip of the blade to pierce the paper and cut straight down.
You should not need a lot of pressure to cut through the paper. Cut out the negative spaces.
When cutting, don’t try to cut the whole shape out at once, lift your blade for every new angle.
Hold the paper steady with one hand, or tape it down to keep in place.
Rotate the paper often so that you are always cutting at an angle that is comfortable and safe.
You can always add new elements to the design and redefine areas.
Make sure to cut the corners of each section well, so the paper doesn’t stick and rip.
The more you cut the more delicate the paper becomes so move slowly.
cut in sections towards solid areas to lessen the risk of cutting through connecting lines.
This can be a slow and tedious process so make sure you get up and stretch often!
I like to flip my piece over to see what it looks like as just a silhouette.
Continue to cut and make adjustments to the design as you go.
Think about composition, how much negative space there is, and how thick the lines are.
You can flip it over and cut with intuition instead of a guide. Especially once the design is clear.
Once you get into it this process is very meditative so enjoy!
You can decide which side is up-do you prefer colorful or white?
Bonus tip: try using different colored or painted papers.
Draw a Unicorn and Pink Watercolor Background
How to make a gif in Photoshop
Draw with Words - Turtle Lettering
How To Create Your First Jumprope
Made with Jumprope