Glitter your tumbler using any method you choose, then coat with one layer of resin.
1
Grab some Quick Coat (QC) from CCDIY
2
Also need some gilding. I’m using High Key Sedona gilding from Nicole Marett Original.
3
The brush I’m using to apply QC. Remember to wash it out as soon as you are finished.
4
Add your QC to a small container and set your gilding out for easy grabs
5
Dip your brush into your QC and dab on the tumbler where you want, then place your gilding.
6
Continue with step 3 until you finish the section. Lightly tapping each piece as you place.
7
Now we wait till QC dries!
8
Once QC is dry (I waited overnight) take your dry brush and brush excess gilding off.
9
Next mix your resin. I used 10ml each part. Make sure to scrape the sides of your cup while mixing.
10
Apply your resin to your tumbler. I always do this off my turner.
11
Now I place it on my turner making sure my resin is even. Then quickly torch.
12
Once your resin is fully cured you’re ready to use your cup!
13
Explore more Jumprope
Want to create? It’s fast, easy, free & open to anyone.
Learn more.
More than 50,000 step-by-step guides to learn how to do anything.