Repeating Prints w/ a PVC Roller Stamp (K-8)
What you'll need
Affiliate Disclosure: I may earn commissions for purchases made through links in this Jumprope.
12” per student. Can be re-used.
1/2” PVC
4” for each roller print block.
1” PVC
One sheet per maker
Adhesive Craft Foam - 6”x9” Sheets
Straight Edge
4 oz bottle will last several sessions
Liquid Watercolor
One for each ink station
Felt Square
One for every station.
Styrofoam Food Tray
1 sheet per maker, as needed
Card Stock or Heavy Weight Drawing Paper
One per classroom
Household Cleaner Or Water In Spray Bottle
One per classroom
Paper Towels
Roller Prints
Draw your design on the paper side so images aren’t reversed. Cut out.
Fit the pieces to the 4” wide pvc roller, and peel and stick firmly. Roll to press into place.
Use a square of felt on a food tray for watercolor ink - a small amount will saturate the pad.
Roll and lift , roll and lift to ink your roller stamp. Use even pressure when printing.
Clean rollers between color changes or for storage.
Change your design by adding color or incorporating another makers’ roller block.
We encourage re-using trays and felt pads. Rinse well and wipe.
Clean up and store - fold and stack with a paper towel, and bag for transport!
Explore more Jumprope
Want to create? It’s fast, easy, free & open to anyone.
Learn more.
More than 50,000 step-by-step guides to learn how to do anything.