Softball Thread Tumbler
Sand and prep your tumbler. Apply spray paint and let completely dry before next step.
1
Mix 5 ml part A and part B of Fast Set. Mix around 60 seconds, scraping sides to thoroughly mix.
2
Add a thin even layer of Fast Set to your tumbler.
3
Apply glitter. Once cured add another layer of resin and let cure completely before next step.
4
Line up your tape and firmly press from the center out. Cut between threads and press to the bottom.
5
Another application method is same as last except cut the thread at the bottom rim.
6
Now trim the tape around the threads then line the seams and press down firmly.
7
Trim any excess tape from the bottom of your tumbler so it doesn’t overlap.
8
Trim the excess from the rim with a razor or exacto knife.
9
Add any decals and a thin layer of Quick Coat.
10
Add a final coat of resin and enjoy!
11
CCDIY Ultra Clear Fast Set
Buy
Artist Resin
Buy
Funky Banana Glitter
Buy
Baseball Thread Tape
Buy
CCDIY Ultra Clear Fast Set
Buy
Artist Resin
Buy
Funky Banana Glitter
Buy
Baseball Thread Tape
Buy
Quick Coat
Buy