Using Worbla Sandwich Method for Cosplay
8 STEPS
Worbla can add strength and stability to foam cosplays.
1
Start with a foam armor or prop piece.
2
Trace twice onto Worbla, leaving a 1/4”- 1/2” allowance.
3
Trim out with scissors.
4
Warm with heat gun. Drape Worbla over foam. Carefully pinch & press heated Worbla into surfaces.
5
Repeat for other side. Reheat as necessary.
6
Trim away excess Worbla. Keep scraps. They’re reusable.
7
That’s it. Now to sand, prime, & paint.
8