Bias Binding Face Mask
20cm
Water Resistant Fabric For Outer Layer.
40cm
Tightly Woven Cotton For Inner Layer
20cm
Blended Fabric For Middle Layer (polyester/nylon)
1 packet
Bias Binding Tape
20cm
Water Resistant Fabric For Outer Layer.
40cm
Tightly Woven Cotton For Inner Layer
20cm
Blended Fabric For Middle Layer (polyester/nylon)
1 packet
Bias Binding Tape
1
Downloadable Mask Pattern
1 pair
Scissors
Pins
50cm
Extra Cotton Fabric For Self Binding (optional)
Print out template and cut 2 pieces out of each layer of fabric. You will have 6 pieces in total.Print out template and cut 2 pieces out of each layer of fabric. You will have 6 pieces in total.
1
Match right sides of each piece together and sew along the curved edge. Repeat with lining pieces.Match right sides of each piece together and sew along the curved edge. Repeat with lining pieces.
2
Open mask and press seam allowance to the right. Top stitch the seam down 6mm from the seam. Repeat.Open mask and press seam allowance to the right. Top stitch the seam down 6mm from the seam. Repeat.
3
Layer mask pieces together with right sides facing out. Baste together with a 3mm seam.Layer mask pieces together with right sides facing out. Baste together with a 3mm seam.
4
Apply bias tape to 2 sides of the mask. Trim tape to size.Apply bias tape to 2 sides of the mask. Trim tape to size.
5
Cut 2 pieces of Bias tape 75cm long. Pin across the top and bottom edges of mask and sew in place.Cut 2 pieces of Bias tape 75cm long. Pin across the top and bottom edges of mask and sew in place.
6
Fold ends of ties over twice and tack in place. Tie a bow or knot to finish.Fold ends of ties over twice and tack in place. Tie a bow or knot to finish.
7