DIY Copper Pipe Garment Rack
Cut a 3/4” plywood sheet into 6 pieces
1
Cut two pieces down to 42” long
2
The cut 24 pieces at 4”
3
Clamp all pieces together and smooth out all the edges with an orbital sander
4
Find the center mark and drill a hole to fit the copper pipe
5
Use piece as a template so all holes are drilled in the same exact place
6
Use template to Drill holes on either side of the top pieces
7
Line up pieces flush to edges and align holes. Alternate pattern of screws when drilling
8
Attach all pieces upside down so that when flipped over no screws show from top side
9
Use tube cutter to cut 3 pieces of copper pipe. Attach them with 2 elbow couplings, set into holes
10
You can glue to copper into place with Gorilla glue
For a moving garment rack attach 4 casters to the underside
11
For more details please visit Homemade-Modern.com
12
What you'll need
1/2” Copper Pipe
Elbow Couplings
RYOBI Orbital Sander
3/4 Inch Plywood
Explore more Jumprope
Want to create? It’s fast, easy, free & open to anyone.
Learn more.
More than 50,000 step-by-step guides to learn how to do anything.