Storing Your Resin In Fifo Bottles
Made with 
Grab some Fifo bottles and let’s get started.
1
Made with 
Biggest complaint is leaking. To prevent that mix up 2 ml Part A and B of Fast Set.
2
Made with 
Using your finger smooth some resin around the rim of your bottles, then screw the lid on tightly.
3
Made with 
Set the bottles aside spout up while curing. Once cured you can fill the bottles.
4
Made with 
Unscrew the spout end of your bottle. Before you fill double check to make sure you have both B’s.
5
Made with 
Fill your bottle then screw the lid back on tight.
6
Made with 
Do the same with your Part A.
7
Made with 
Now your bottles are ready for use.
8
Made with 
Grab a 60 ml syringe.
9
Made with 
Insert your syringe and draw back the amount you need for your mix.
10
Made with 
If you get bubbles, hold the syringe upright and the bubbles will rise then you can push them out.
11
Made with 
Add to your mixing cup.
12
Made with 
Now draw back your Part A. I always add Part A second so none of it sticks to the side of my cup.
13
Made with 
Now you can mix and apply to your project. No extra cups to clean up or keep track of!
14
Made with 
When not using store with the spout facing up. This will prevent leaking.
15
Made with 
I may earn commissions for purchases made through links in this video.
Fifo Bottles
Buy
Fast Set Epoxy
Buy
Artist Resin
Buy
EcoArt Solutions Stirring Sticks
Buy
Fifo Bottles
Buy
Fast Set Epoxy
Buy
Artist Resin
Buy
EcoArt Solutions Stirring Sticks
Buy
Nitrile Gloves
Buy
EcoArt Solutions Mixing Cup
Buy